What's worse?

What could be worse than a Space Marine Legion that fell to the Chaos powers and rebelled against everything they once respected? We don't know, but it was probably pretty bad.



Friday, September 3, 2010

Eldar Super-Super Heavy Acrylic Tank



Finally made some progress on my super-super heavy Eldar tank hull. I called the last one a Star Dragon. The Star Dragon was cut out of wood, which was very messy, had terrible texture, and was very uneven. This new one is out of 0.22" clear acrylic. It is very smooth. The only trouble that I had with it is, as it is clear it is difficult to tell which side you are working on! I glued together the port half, and then started in on the starboard. After the first pieces of the starboard half were drying, I noticed that I had glued them together backwards, making a second port half!

I was very dejected, since I had cut these pieces out on the laser before my back surgery and there was no way to get back to the laser since I've taken so long to recover. I knew that I wasn't going to be able to finish it. I was so disappointed that I didn't even put the pieces away. I just left them on the table.

Skip forward a month or so. My back and leg are still keeping me away from the laser. I was using my fret saw for something else, and figured it couldn't hurt to try to cut the starboard pieces apart. At the worst, I'd ruin the pieces that I'd already ruined. Anyway, as the pictures above show, it worked! It was a lot of effort to cut apart, and even more to sand the previously glued surfaces, but it was better than waiting for the TechShop to get a handicapped elevator.

So, there's a picture of my new Farseer, standing on the bridge of his new tank. If I decide not to put a turret on it, then I could get a nice desk and an entertainment center on it for him to entertain visiting Seer Councils during battlefield drills. I was calling this hull a grav yacht, after all.

2 comments:

  1. Great news Matt! Glad you were able to figure out a solution. Can't wait to see the finished product.

    ReplyDelete
  2. Ditto. Glad you were able to salvage that, it would have been heartbreaking to see it be a total loss.

    ReplyDelete